Five innovative lubrication technologies


-longer oil change interval

conventional lubricating oil is easy forming paint film, sludge, carbon residue and other precipitates in the lubricating system if it is not used properly. Frequent oil changes will not only increase oil purchases , but also increase labor costs and downtime losses. Sainaide lubricating oils are selected from the second and third types of base oils and four and five types of synthetic oils that have been refined for many times, plus multiple anti-oxidation , high-temperature technologies, and cooperate with the Sainaide tools for daily maintenance , Its service life is 30-300% longer than most brands of oil at the same price, which greatly reduces oil costs.

Anti-wear and anti-friction
Oil film rupture and additive failure are the most important reasons for surface wear of parts . Sainaide has independently developed a variety of anti-friction and anti-extreme pressure additives. The additives cooperate with each other can form a protective layer at the moment of contact with the metal to protect the metal surface from abrasion and maintain consistency

Temperature resistance
- resist high and low temperature environment

The viscosity of conventional products decreases significantly at high temperature, resulting in a decrease in lubricating effect; high viscosity is prone to appear at low temperature, causing difficulty in starting and increasing load. Sinaide lubricants have the function of maintaining high temperature viscosity and reducing friction. Under the same load condition, the temperature of the oil is significantly lower than other brands of the same grade lubricants, which greatly delays the aging of the oil. It is easy to start at low temperatures due to easy flow , reduce energy consumption.

-Provide comprehensive protection for different working conditions

Each series of Lubricants from Sainaide is developed according to the requirements of working conditions in different specific environments. For example, anti-emulsification and anti-corrosion lubricating oils are required for mutual equipment; long-life lubricating oils are required for equipment that is inconvenient to maintain; Equipment with large consumption and serious oil leakage needs economical lubricating oil, and high-pressure system needs lubricating oil with very fast defoaming.

Keep the oil with ultra-high cleanliness
-Particles in the hydraulic circulation system is easy to block the filter element, scratch the seal, and cause the original pump valve to wear or fail. Major hydraulic component manufacturers require that the cleanliness of medium and high hydraulic systems should be controlled at NAS 7~8, and the cleanliness of sensitive and high-pressure servo hydraulic systems should be controlled at NAS 5~6. Now the new oils cleanliness of most brand lubricants products on the market can only reach NAS 9~10. The cleanliness of conventional oil products of Sainaide is controlled at NAS level of 7~8. For high-demand hydraulic systems, Sainaide uses aviation-grade fine filtration technology to control the cleanliness of new oil within NAS level 5~6 and pollute particles only 6% of most brands on the market, greatly reducing the occurrence of pump valve failure.

Post time: Aug-09-2021